Vallox 096 MV Manual - Profile Settings
20
SETUP WIZARD
PROFILE SETTINGS
NOTE
By default, the At home profile uses the higher basic ventilation
fan speed. We recommend that this basic ventilation setting be
used with the At home profile. Once you have set the fan speed
for the At home profile, the fan speed for the Away profile will
by default be set to -30% of the At home profile fan speed.
We recommend that the default fan speed settings be used.
However, the settings can be changed as required.
At home and Away profiles
To set the ventilation settings of the profiles:
1. Use the
Plus
or
Minus
buttons to set the profile fan speed
as a percentage of the maximum output ratio.
2. The fan speed is now set for the profile.
3. Proceed to the next phase by selecting
Right arrow
.
4. Use the
Plus
or
Minus
buttons to set the desired supply air
temperature for the profile. You can adjust the temperature
in the range +10°C ... +25°C.
5. The profile supply air temperature is now set.
6. Proceed to the next phase by selecting
Right arrow
.
7. Use the
Plus
and
Minus
buttons to turn the automatic fan
speed control based on relative humidity of air on or off.
8. The automatic fan speed control, based on the relative
humidity of air, is now set.
9. Proceed to the next phase by selecting
Right arrow
.
10. Use the
Plus
and
Minus
buttons to turn the automatic fan
speed control based on carbon dioxide content on or off.
11. The automatic fan speed control, based on the carbon
dioxide level, is now set.
12. Select
OK
.
13. Proceed to the settings of the next profile by selecting
Right
arrow.
NOTE
Once you have set the fan speed for the At home profile, the
fan speed for the Boost profile will by default be set to +30%
of the At home profile fan speed. It is recommended that this
fan speed setting be used for the Boost profile. However, the
setting can be changed as required.
Boost profile
The fan speed, supply air temperature, and the automatic fan
speed control (based on either relative humidity of air or carbon
dioxide level) is set for the Boost profile in the same way as for
the At home and Away profiles. The Boost profile also has a
timer setting.
TIP
You can browse the At home
profile settings with the Right
arrow button.
EXPERT SETTINGS