Vallox 096 MV Manual - Changing The Profile
23
© Vallox Oy - All rights reserved
USING THE UNIT
VENTILATION PROFILES
CHANGING THE PROFILE
1. Press
the Change profile
button until the desired ventilation
profile icon appears on the display.
2. Wait until the main display of the ventilation profile appears.
3. The ventilation profile has now been changed.
Browsing the information of the At home,
Away, and Boost profiles.
To view the profile settings:
1. Open the main display of the profile you wish to view.
2. Select
Profile information
.
The following information is shown on the first information
display of the profile:
•
Supply air
— Indicates the temperature of the air blown into
the building and its set value (in brackets), if the supply air is
warmer than the set value.
•
Outdoor air
— Indicates the outdoor temperature.
•
Fan speed
— Indicates the fan speed. If the automatic fan
speed boost is turned on, the set value is shown in brackets
first followed by the actual fan speed.
•
Cell status
— Indicates the status of the ventilation unit heat
recovery cell. The status options are:
• Heat recovery
— The heat recovery cell heats the air streaming
in from outdoors.
• Cooling
— The heat recovery cell cools the air streaming in from
outdoors.
• Cell bypass
— The inflowing air bypasses the heat recovery cell.
• Defrosting
— The heat recovery cell is being defrosted.
3. Proceed to the next phase by selecting
Right arrow
.
The next information display of the profile shows the following
information:
•
Humidity
— Indicates the highest relative humidity of air
measured by the sensors.
•
Carbon dioxide
— Indicates the highest carbon dioxide level
measured by the sensors.
•
Replace filters
— Indicates the next recommended filter
replacement date.
•
Time in operation
— Indicates how long the device has been
running.