Vallox 096 MV Manual - page 21

21

© Vallox Oy - All rights reserved

SETUP WIZARD

EXPERT SETTINGS

1.  Use the 

Plus

 and 

Minus

 buttons to turn the profile timer 

function on or off. The options are:

•  On 

— When the timer is on, the 

Boost

 profile is used only for the 

period specified in the timer.

•  Off 

— When the timer is off, the 

Boost

 profile is used until the 

profile is changed, either manually or automatically by the week 

clock.

2.  Proceed to the next phase by selecting 

Right arrow

.

3.  Use the 

Plus

 and 

Minus

 buttons to set the profile timer duration 

in minutes.

4.  Select 

OK

.

5.  Proceed to the settings of the next profile by selecting 

Right 

arrow

.

Fireplace profile

1.   Use  the 

Plus

 and 

Minus

 buttons to set the Fireplace profile 

timer duration in minutes.

2.   The 

Fireplace

 profile timer duration is now set.

3.  Proceed to the next phase by selecting 

Right arrow

.

4.   Use  the 

Plus

 and 

Minus

 buttons to set the 

Fireplace

 profile’s 

supply air fan speed as a percentage of the maximum output 

ratio.

TIP

It is recommended that a higher supply air fan speed be used in 

the fireplace profile to create overpressure in the ventilation zone. 

Reducing the extract air fan speed is not recommended.

5.   The supply air fan speed of the 

Fireplace

 profile is now set.

6.  Proceed to the next phase by selecting 

Right arrow

.

7.   Use  the 

Plus

 and 

Minus

 buttons to set the extract air fan speed 

of the 

Fireplace profile

 as a percentage of the maximum output 

ratio.

8.   The extract air fan speed of the 

Fireplace

 profile is now set.

9.   Proceed to the next phase by selecting 

Right arrow

.

10.   Use  the 

Plus

 and 

Minus

 buttons to turn the profile timer 

function on or off. The options are:

•  On 

— When the timer is on, the 

Fireplace

 profile is used only for the 

period specified by the timer.

•  Off

 — When the timer is off, the 

Fireplace

 profile is used until the 

profile is changed, either manually or automatically by the Week 

clock.

11.   The profile timer function is now set.

12.   Select 

OK

.

IMPORTANT

Do not turn the timer function off if there is no timer in the external 

fireplace switch.

Finishing the setup

Once you have completed all phases of the setup, finish up the 

setup as follows:

1.  To change any of the set values, use the arrow buttons to 

return to the desired line and then press 

OK

.

2.  When you are satisfied with the settings, use the arrow buttons 

to select 

Start

 and then press 

OK

.

 TIP

You can browse the settings 

of the Boost or the Fireplace 

profile by using the Right arrow 

button.