Vari Lite VL2000 User Manual - Www.Carlosmendoza.Com.Mx
M
ENU
S
YSTEM
: M
APPING
4
0 2 . 9 6 7 1 . 0 0 0 1 F
07-M ay- 03
61
Function Definitions
Each menu item is listed in the first column by its display abbreviation. The abbreviations appear in
alphabetical order.
Table 4-2: Menu Function Definitions
Display
Definition
Purpose
⇓⇓
Display Orientation
Shows upside-down orientation (for hanging luminaires)
⇑⇑
Display Orientation
Shows upright orientation.
8
Standard 8-bit
Configures luminaire for operation in standard DMX 8-bit mode.
16
Standard 16-bit
Configures luminaire for operation in standard DMX 16-bit mode.
10M
10 Minutes
Sets Menu Display to automatically shut off after 10 minutes of
non-use.
30s
30 Seconds
Sets Menu Display to automatically shut off after 30 seconds of
non-use.
5M
5 Minutes
Sets Menu Display to automatically shut off after 5 minutes of non-
use.
Addr
Address
Accesses functions for setting luminaire starting address in either
Virtuoso (VIRT) or DMX (DMX) controlled systems.
ALL
All Motors
Tests all internal motors.
Ambr
Amber
Specifies Amber for manual control (Man) or test Amber functions
(Test).
Auto
Auto Detect or
Auto Playback
Automatically detects required Menu Display orientation when
selected (DDir) or initiates automatic playback of a cue sequence
at power-up (CUE).
Blue
Blue
Specifies Blue for manual control (Man) or tests Blue functions
(Test).
BTim
Beam Time
Accepts timing value for beam time.
C ON
On after Calibra-
tion
Configures arc luminaire so that lamp will strike after calibration
procedure is complete.
Cal
Re calibrate
Re calibrates luminaire.
CFG
System
Configuration
Accesses functions for setting lamp start up, pan/tilt, and Menu
Display configurations. Also accesses lamp information such as
number of strikes, and hours used, along with their respective
reset function.
CWhl
Color Wheel
Specifies Color Wheel for manual control and test.
CMiX
Color Mixer
Tests color mixing mechanism.
CTim
Color Time
Sets color time. This applies to Blue, Amber, Magenta and Color
Wheel.
Cue
Cue Processing
Accesses cue store, modify, delete, and playback commands.
cXX
Cue Data
Specifies cue number for display of current data value.
cXXX
DMX Channel
Specifies DMX channel for display of current data value.
DATA
DMX Data
Accesses function for displaying DMX data by channel number.