Vari Lite VL2000 User Manual - Www.Carlosmendoza.Com.Mx
M
ENU
S
YSTEM
: C
UES
AND
S
EQUENCES
4
0 2 . 9 6 7 1 . 0 0 0 1 F
07-M ay- 03
67
Step
5. Repeat for remaining cues.
To delete a cue:
Step
1. Press [Menu].
Step
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
Step
3. Press [Up] / [Down] arrows until Del appears. Press [Enter]. The last cue number stored will
be displayed and only the last cue will be deleted.
Step
4. Press [Enter] to delete cue. (There is no “undo” function.)
To play a cue:
Step
1. Press [Menu].
Step
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
Step
3. Press [Up] / [Down] arrows until PCue appears. Press [Enter]. This allows the stored cues
to be selected by using [Up] / [Down] arrows and then played by pressing [Enter]. (If there
are no stored cues, "C --" will be displayed. If there is one or more cues, "C xx" will be
displayed - where xx is the cue number from 1 to 99. Only cues in one luminaire will play.)
To edit or modify a cue:
Step
1. Recall cue to be changed from PCue.
Step
2. Change luminaire data to desired levels using Man (Manual Command) functions.
Step
3. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
Step
4. Press [Up] / [Down] arrows until Mod appears. Press [Enter]. The number displayed is the
same as the selected cue.
Step
5. Press [Enter] and changes will be saved.
To play cues as a sequence:
Step
1. Press [Menu].
Step
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
Step
3. Press [Up] / [Down] arrows until PSEQ appears. Press [Enter] and the sequence will play.
The active cue will be shown in the display. [Enter] to start, [Menu] to stop.
To change the follow time in a sequence:
The follow time is stored for each cue individually.
Step
1. Select cue to be changed from PCue.
Step
2. Go to Mod to modify active cue and press [Enter] to save the change.
Step
3. Set FLTM (Follow Time) to desired value (refer to
“Set follow time between cues:” on
).
To delete a sequence and all cues:
Step
1. Press [Menu].
Step
2. Press [Up] / [Down] arrows until Cue appears. Press [Enter].
Step
3. Press [Up] / [Down] arrows until DSEQ appears. Press [Enter].
Step
4. OK? prompt will appear. Press [Enter] to delete stored sequence.