Vari Lite VL2000 User Manual - Www.Carlosmendoza.Com.Mx
VARI
❋
LITE® - VL2000™ W
ASH
L
UMINAIRE
U
SER
’
S
M
ANUAL
9 0
07-M ay- 03
0 2 . 9 6 7 1 . 0 0 0 1 F
CAUTION: Do not touch color filters with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if required.
Note: In some cases it is easier to slide bulkhead partially out of head assembly to access color filters.
To do this, use #2 Phillips screwdriver to turn captive screw one-quarter turn and slide bulkhead
upward. Disconnect motor connections as necessary.
Step
3. Rotate wheel until required color filter is accessible at finger access cutout. See Figure A-3.
Figure A-3: Filter Replacement
CAUTION: Do not touch color filters with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if touched.
Step
4. Using fingers, pull color filter out of wheel.
Step
5. Noting proper orientation of carrier slot, insert
new color filter into position and push fully into
place. See Figure A-4.
Step
6. Re-install bulkhead (if applicable) and re-install
removable cover.
Figure A-4: Filter Installation
Finger Access
Cutout
Color Wheel
Color
Filter Wheel
Color Filter
Carrier Slot