Vari Lite VL2000 User Manual - Www.Carlosmendoza.Com.Mx
M
ENU
S
YSTEM
: S
ELF
T
ESTS
4
0 2 . 9 6 7 1 . 0 0 0 1 F
07-M ay- 03
71
Diagnostic Tests
The following diagnostic tests are available in the test menu. Time is specified for each action in the
test, and the total time equals the time it takes to complete each action. If the time is zero the luminaire
will perform the test at full speed.
Test Descriptions (In alphabetical order)
ALL1.......................... Tests low voltage power supplies by moving all motors at once.
ALL2.......................... Tests all functions and provides a burn in or soak test.
Bl 1/Amb1/MAG1 ...... Fast color mixer tests, Goes from full color to open.
Bl 2/Amb2/MAG2 ...... Slow color mixer tests, Goes from full color to open.
Bl 3/Amb2/MAG3 ...... Tests different color mixer positions.
Cw 1 .......................... Steps through each position of color wheel to verify order. The test
then performs a Max forward spin, stops, and performs a Max reverse
spin.
Cw 2 .......................... Tests color wheel stabilizers. Performs Max reverse spin, stops on a
color, and then stops on the sensor.
Cw 3 .......................... Test color wheel stabilizers. Steps through selected colors.
DiF1........................... Fast diffusion test from stop to stop.
DiF2........................... Slow diffusion test from stop to stop.
DiF3........................... Tests different diffusion positions.
Dim1.......................... Fast dimmer test from full to closed.
Dim2.......................... Slow dimmer test from full to closed.
Dim3.......................... Tests different dimmer moves.
MiX1 .......................... Fast color mixer test where all colors are operating.
MiX2 .......................... Slow color mixer test where all colors are operating.
MiX3 .......................... Tests different positions with all colors operating. Verifies the color
match for VL2416.
PT1............................ Fast pan and tilt from stop to stop.
PT2............................ Slow pan and tilt from stop to stop.
P 1............................. Fast pan only test from stop to stop.
P 2............................. Slow pan only test from stop to stop.
P 3............................. Tests different pan movements.
T 1 ............................. Fast tilt only test from stop to stop.
T 2 ............................. Slow tilt only test from stop to stop.
T 3 ............................. Tests different tilt movements.
Strb............................ Strobe test that tests 0-Open, 4-Closed, 11-Fast Random, 255-Max
Strobe actions.
The chart on the following page shows the 16-bit DMX values used in each test.