Vari Lite VL2000 User Manual - Www.Carlosmendoza.Com.Mx
VARI
❋
LITE® - VL2000™ W
ASH
L
UMINAIRE
U
SER
’
S
M
ANUAL
6 2
07-M ay- 03
0 2 . 9 6 7 1 . 0 0 0 1 F
DDir
Display Orientation
Accesses option to orient Menu display for reading correctly in
either hanging or floor mounting installations.
Del
Delete Cue
Deletes cues by number. Cue number deleted is dependent on
last cue ID in cue list since this field is not editable.
DIFF
Diffusion
Specifies manual control of Diffusion (Man) or tests Diffusion func-
tions (Test).
Dimm
Dimmer
Specifies dimmer mechanism for manual control (Man) or tests
dimmer/strobe functions (Test).
Dis
Disable
Disables a function.
DisP
Display Illumina-
tion
Accesses options for Menu Display on and off times.
DISP
Display Test
Tests all 14 segments in the Display.
DMX
DMX
Accesses functions for setting DMX mode or pan/tilt options (1st
level menu) or sets starting address for luminaire in DMX systems
(Addr).
Dnld
Download
Downloads program to luminaires.
DSEQ
Delete Sequence
Deletes cue sequence.
E 16
Enhanced 16-bit
Configures luminaire for operation in enhanced DMX 16-bit mode.
E 8
Enhanced 8-bit
Configures luminaire for operation in enhanced DMX 8-bit mode.
Enab
Enable
Enables a function.
Encr
Encoders
Accesses encoder choices for diagnostic testing.
FAIL
Test Fail
Indicates that sensor test has failed.
FHrs
Fixture Hours
Displays total number of hours luminaire has been powered on.
Fixt
Fixture
Access luminaire specification information such as model, serial
number, software version, along with status information and
download function.
FLTM
Follow Time
Accepts value for cue follow feature.
FTim
Focus Time
Accepts timing value for focus time.
InvP
Invert Pan
Reverses pan action for special focus requirements.
InvT
Invert Tilt
Reverses tilt action for special focus requirements.
ISEQ
Individual
Sequence
A sequence playback mode which will play the cues from each
individual luminaire, if any. (In ISEQ, if the number of cues is dif-
ferent, it will only play as many as each luminaire has stored. The
follow time is taken from the master luminaire.)
ITim
Intensity Time
Accepts timing value for intensity fade time.
L ON
Lamp is On
Configures arc luminaire so that lamp will strike upon power up.
LAMP
Lamp
Accesses lamp power up options and information (CFG) and sets
beam for lamp alignment adjustment (TEST).
LHrs
Lamp Hours
Displays total number of lamp operating hours.
LId
Luminaire ID
Displays unique ID number for the luminaire which is used by Vir-
tuoso consoles to identify the unit (in two pages).
Table 4-2: Menu Function Definitions (Continued)
Display
Definition
Purpose