Quick setup guide radar sensor for continuous level measurement of liquids vegapuls 61 profibus pa approval according to lpr radio standard document id: 47106.
2 contents vegapuls 61 • profibus pa 47106-en-161104 contents 1 for your safety 1.1 authorised personnel ....................................................................................................... 3 1.2 appropriate use ........................................................................
3 1 for your safety vegapuls 61 • profibus pa 47106-en-161104 1 for your safety 1.1 authorised personnel all operations described in this operating instructions manual must be carried out only by trained specialist personnel authorised by the plant operator. During work on and with the device the re...
4 1 for your safety vegapuls 61 • profibus pa 47106-en-161104 1.5 eu conformity the device fulfils the legal requirements of the applicable eu guide- lines. By affixing the ce marking, we confirm the conformity of the instrument with these guidelines. You can find the eu conformity declaration on ou...
5 1 for your safety vegapuls 61 • profibus pa 47106-en-161104 • manholes and flanges on the vessel must be closed and sealed to avoid penetration of the radar signal • the instrument should be preferably mounted on top of the vessel with antenna orientation downward • the instrument must only be ins...
6 2 product description vegapuls 61 • profibus pa 47106-en-161104 2 product description 2.1 configuration the type label contains the most important data for identification and use of the instrument: 2 1 15 13 14 12 11 5 3 6 4 7 8 10 9 fig. 1: layout of the type label (example) 1 instrument type 2 p...
7 3 mounting vegapuls 61 • profibus pa 47106-en-161104 3 mounting 3.1 collar or adapter flange for mounting the instrument on a socket, a combi compression flange for dn 80 (asme 3" or jis 80) is also available for retro fitting. Option- ally, the instrument can be also equipped with an adapter flan...
8 3 mounting vegapuls 61 • profibus pa 47106-en-161104 – angle of inclination 180°, infinitely variable – angle of inclination in three steps 0°, 90° and 180° • double chamber housing – angle of inclination 90°, infinitely variable – angle of inclination in two steps 0° and 90° fig. 3: adjustment of...
9 3 mounting vegapuls 61 • profibus pa 47106-en-161104 2. Note min. Socket diameter depending on the socket length for further information see chapter "mounting"..
10 4 connecting to the bus system vegapuls 61 • profibus pa 47106-en-161104 4 connecting to the bus system 4.1 connecting the voltage supply and signal output are connected via the spring- loaded terminals in the housing. Connection to the display and adjustment module or to the interface adapter is...
11 4 connecting to the bus system vegapuls 61 • profibus pa 47106-en-161104 fig. 7: connection steps 5 and 6 - double chamber housing 6. Insert the wire ends into the terminals according to the wiring plan information: solid cores as well as flexible cores with wire end sleeves are insert- ed direct...
12 4 connecting to the bus system vegapuls 61 • profibus pa 47106-en-161104 5 0 0 5 1 6 2 7 3 8 4 9 0 5 1 6 2 7 3 8 4 9 1 0 1 6 7 8 bus 2 3 4 5 1 2 + ( ) (-) 1 fig. 8: electronics and terminal compartment - single chamber housing 1 voltage supply, signal output 2 for display and adjustment module or...
13 5 set up with the display and adjustment module vegapuls 61 • profibus pa 47106-en-161104 5 set up with the display and adjustment module 5.1 insert display and adjustment module the display and adjustment module can be inserted into the sensor and removed again at any time. You can choose any on...
14 5 set up with the display and adjustment module vegapuls 61 • profibus pa 47106-en-161104 1 2 fig. 11: installing the display and adjustment module in the double chamber housing 1 in the electronics compartment 2 in the terminal compartment note: if you intend to retrofit the instrument with a di...
15 5 set up with the display and adjustment module vegapuls 61 • profibus pa 47106-en-161104 the radar sensor measures the distance from the sensor to the product surface. For indication of the real level, an allocation of the measured distance to the percentage height must be carried out. 100% 0% 0...
16 5 set up with the display and adjustment module vegapuls 61 • profibus pa 47106-en-161104 the following circumstances cause interfering reflections and can influence the measurement: • high sockets • vessel internals such as struts • agitators • buildup or welded joints on vessel walls note: a fa...
17 5 set up with the display and adjustment module vegapuls 61 • profibus pa 47106-en-161104 delete: an already created false signal suppression will be com- pletely deleted. This is useful if the saved false signal suppression no longer matches the metrological conditions in the vessel. Extend: is ...
18 5 set up with the display and adjustment module vegapuls 61 • profibus pa 47106-en-161104 menu - diagnosis menu item parameter default setting sensor status - peak value distance - electronics tem- perature, further temperature - meas. Certainty - simulation percent curve indication echo curve - ...
19 6 supplement vegapuls 61 • profibus pa 47106-en-161104 6 supplement 6.1 technical data note for approved instruments the technical data in the respective safety instructions are valid for approved instruments (e.G. With ex approval). These data can differ from the data listed herein, for example ...
20 6 supplement vegapuls 61 • profibus pa 47106-en-161104 Ʋ ex 10
21 notes vegapuls 61 • profibus pa 47106-en-161104.
22 notes vegapuls 61 • profibus pa 47106-en-161104.
23 notes vegapuls 61 • profibus pa 47106-en-161104.
Printing date: vega grieshaber kg am hohenstein 113 77761 schiltach germany 47106-en-161 104 all statements concerning scope of delivery, application, practical use and operat- ing conditions of the sensors and processing systems correspond to the information available at the time of printing. Subje...