- DL manuals
- Vega
- Radar
- VEGAPULS 69
- Quick Setup Manual
Vega VEGAPULS 69 Quick Setup Manual
Summary of VEGAPULS 69
Page 1
Quick setup guide radar sensor for continuous level measurement of bulk solids vegapuls 69 hart and accumulator pack document id: 47254.
Page 2: Contents
2 contents vegapuls 69 • hart and accumulator pack 47254-en-170818 contents 1 for your safety 1.1 authorised personnel ....................................................................................................... 3 1.2 appropriate use ..........................................................
Page 3: 1 For Your Safety
3 1 for your safety vegapuls 69 • hart and accumulator pack 47254-en-170818 1 for your safety 1.1 authorised personnel all operations described in this operating instructions manual must be carried out only by trained specialist personnel authorised by the plant operator. During work on and with the...
Page 4
4 1 for your safety vegapuls 69 • hart and accumulator pack 47254-en-170818 to avoid any danger, the safety approval markings and safety tips on the device must also be observed and their meaning looked up in this operating instructions manual. Depending on the instrument version, the emitting frequ...
Page 5
5 1 for your safety vegapuls 69 • hart and accumulator pack 47254-en-170818 • the mounting location must be at least 4 km away from radio astronomy stations, unless special permission was granted by the responsible national approval authority • when installed within 4 to 40 km of a radio astronomy s...
Page 6: 2 Product Description
6 2 product description vegapuls 69 • hart and accumulator pack 47254-en-170818 2 product description 2.1 configuration thetypelabelcontainsthemostimportantdataforidentificationand use of the instrument: 2 1 15 13 14 12 11 5 3 6 4 7 8 10 9 fig. 1: layout of the type label (example) 1 instrument type...
Page 7: 3 Mounting
7 3 mounting vegapuls 69 • hart and accumulator pack 47254-en-170818 3 mounting 3.1 mounting preparations, mounting strap the mounting strap is supplied unassembled (optionally) and must be screwed to the sensor before setup with three hexagon socket screws m5 x 10 and spring washers. Max. Torque, s...
Page 8
8 3 mounting vegapuls 69 • hart and accumulator pack 47254-en-170818 information: whenthehousingisrotated,thedirectionofpolarizationchanges andhencetheinfluenceofthefalseechoonthemeasuredvalue. Please keep this in mind when mounting or making changes later. Mount the sensor at least 200 mm (7.874 in...
Page 9
9 4 connecting to power supply vegapuls 69 • hart and accumulator pack 47254-en-170818 4 connecting to power supply 4.1 connection of the battery charger we recommended charging the integrated accumulator completely beforesettinguptheinstrument.Youcanfindthechargingtimein chapter "technical data". T...
Page 10
10 4 connecting to power supply vegapuls 69 • hart and accumulator pack 47254-en-170818 • ledoff=accumulatorisempty.
Page 11: Module
11 5 set up with the display and adjustment module vegapuls 69 • hart and accumulator pack 47254-en-170818 5 set up with the display and adjustment module 5.1 insert display and adjustment module the display and adjustment module can be inserted into the sensor andremovedagainatanytime.Youcanchoosea...
Page 12
12 5 set up with the display and adjustment module vegapuls 69 • hart and accumulator pack 47254-en-170818 youcanfind"extended adjustment" in the next sub-chapter. 1. Measurement loop name inthefirstmenuitemyouassignasuitablemeasurementloopname. Permitted are names with max. 19 characters. 2. Medium...
Page 13
13 5 set up with the display and adjustment module vegapuls 69 • hart and accumulator pack 47254-en-170818 7. Termination "quick setup terminated successfully"isbrieflydisplayed.Theecho curve of the setup is stored automatically. Thequicksetupisfinished. The return to the measured value indication i...
Page 14
14 5 set up with the display and adjustment module vegapuls 69 • hart and accumulator pack 47254-en-170818 2 1 3 100% 0% 1 m (39.37 ") 35 m (1378 ") fig. 7: parameterisation example, min./max. Adjustment 1 min. Level = max. Measuring distance 2 max. Level = min. Measuring distance 3 reference plane ...
Page 15
15 5 set up with the display and adjustment module vegapuls 69 • hart and accumulator pack 47254-en-170818 thefollowingcircumstancescauseinterferingreflectionsandcan influencethemeasurement: • high mounting sockets • vessel internals such as struts • agitators • buildup or welded joints on vessel wa...
Page 16
16 5 set up with the display and adjustment module vegapuls 69 • hart and accumulator pack 47254-en-170818 if a false signal suppression has already been saved in the sensor, the following menu window appears when selecting "false signal suppression": delete: an already created false signal suppress...
Page 17
17 5 set up with the display and adjustment module vegapuls 69 • hart and accumulator pack 47254-en-170818 menu item default setting displayed value 1 filling height in % displayed value 2 electronics temperature in °c backlight switched on menu item parameter default setting sensor status - peak va...
Page 18
18 5 set up with the display and adjustment module vegapuls 69 • hart and accumulator pack 47254-en-170818 menu item parameter device name vegapuls 6. Instrument version hardware and software version factory calibration date date sensor characteristics order-specificcharacteristics info.
Page 19: 6 Supplement
19 6 supplement vegapuls 69 • hart and accumulator pack 47254-en-170818 6 supplement 6.1 technical data note for approved instruments the technical data in the respective safety instructions are valid for approved instruments (e.G. With exapproval).Thesedatacandifferfromthedatalistedherein,forexampl...
Page 20
Printing date: vega grieshaber kg am hohenstein 113 77761 schiltach germany 47254-en-170818 all statements concerning scope of delivery, application, practical use and operat- ing conditions of the sensors and processing systems correspond to the information available at the time of printing. Subjec...