Operating instructions process assembly vegapuls 69 document id: 50714.
2 contents process assembly • vegapuls 69 50714-en-150903 contents 1 about this document 1.1 function ........................................................................................................................... 3 1.2 target group ..........................................................
3 1 about this document process assembly • vegapuls 69 50714-en-150903 1 about this document 1.1 function this operating instructions manual has all the information you need for quick mounting and setup of a replacement module. Please read this manual before you start setup. 1.2 target group this op...
4 2 for your safety process assembly • vegapuls 69 50714-en-150903 2 for your safety 2.1 authorised personnel all operations described in this operating instructions manual must be carried out only by trained specialist personnel authorised by the plant operator. During work on and with the device t...
5 3 product description process assembly • vegapuls 69 50714-en-150903 3 product description 3.1 configuration the scope of delivery encompasses: • process assembly • documentation – this operating instructions manual the process component consists of the antenna system and the con- nection piece to...
6 3 product description process assembly • vegapuls 69 50714-en-150903 the delivery must be checked for completeness and possible transit damage immediately at receipt. Ascertained transit damage or con- cealed defects must be appropriately dealt with. Up to the time of installation, the packages mu...
7 4 mounting process assembly • vegapuls 69 50714-en-150903 4 mounting 4.1 mounting preparations the following tools are required for dismounting the existing and mounting the new process component: • torx screwdriver, size t 10 • flat-headed screwdriver, size 4 • screwdriver for recessed head screw...
8 4 mounting process assembly • vegapuls 69 50714-en-150903 2 5 5 5 6 6 6 7 7 7 8 8 8 1 1 1 2 2 2(-) (-) (-) (+) (+) (+) 1 fig. 4: loosen the holding screws 1 electronics module 2 screws (2 pcs.) 5. Pull the electronics out by holding the plastic strap. Proceed as follows: 1. Loosen the screws of th...
9 4 mounting process assembly • vegapuls 69 50714-en-150903 1 fig. 6: double chamber housing 1 position of the screw 4. Remove the housing 4.3 mounting steps new process component 1. Place the housing onto the new process component. 2. With aluminium double chamber or stainless steel housing: tighte...
10 5 setup process assembly • vegapuls 69 50714-en-150903 5 setup 5.1 setup setup is carried out according to the operating instructions manual of the respective sensor..
11 6 maintenance process assembly • vegapuls 69 50714-en-150903 6 maintenance 6.1 how to proceed if a repair is necessary youcanfindaninstrumentreturnformaswellasdetailedinfor- mation of the procedure in the download area on our homepage: www.Vega.Com. By doing this you help us carry out the repair ...
12 7 dismount process assembly • vegapuls 69 50714-en-150903 7 dismount 7.1 dismounting steps warning: before dismounting, be aware of dangerous process conditions such as e.G. Pressure in the vessel or pipeline, high temperatures, cor- rosive or toxic products etc. Take note of chapters "mounting" ...
13 8 supplement process assembly • vegapuls 69 50714-en-150903 8 supplement 8.1 technical data technical data are stated in the operating instructions manual of the respective sensor..
14 notes process assembly • vegapuls 69 50714-en-150903.
15 notes process assembly • vegapuls 69 50714-en-150903.
Printing date: vega grieshaber kg am hohenstein 113 77761 schiltach germany 50714-en-150903 all statements concerning scope of delivery, application, practical use and operat- ing conditions of the sensors and processing systems correspond to the information available at the time of printing. Subjec...
