Waldorf RN8410G Installation And Operation Manual - page 15

13 

Operation

Griddle 

Lighting the Griddle 

a.  Depress gas control knob and rotate anti-clockwise to ‘PILOT’ position. 

b.  Hold gas control knob depressed, press piezo ignition button to ignite pilot burner.  Repeat Items 

1 to 2 until pilot is lit. 

c.  Release gas control knob approximately 10-20 seconds after lighting pilot. 

d.  Pilot should now remain alight - if not, repeat Steps (b. to (c. above. 

e.  To select ‘Full Flame’, depress and rotate gas control knob anti-clockwise to ‘HIGH’ position. 

f.  To select ‘Low Flame’, depress and rotate gas control knob fully anti-clockwise to ‘Low Flame’ 

position. 

g.  When main burner is not required, depress and turn gas control knob clockwise back to ‘OFF’ 

position. 

Turning 'OFF' the Griddle Burner / Pilot 

a.  To turn 'OFF' griddle, but keep pilot burner alight, rotate gas control knob to 'PILOT' position.  

Griddle burner will extinguish and pilot will remain alight. 

b.  To turn 'OFF' 'PILOT', depress and turn gas control knob clockwise back to ‘OFF’ position.  'PILOT' 

burner will extinguish.