WaterRower M1 SERIES Owner's Manual - page 12
12
STEP 4
Secure the tank assembly to the rails using 4 (2 on either side) of the button
head screws. The bolts go through from the inside of the forward riser bracket
into rivets in the rail. (Diagram B).
B
STEP 5
Use the included syphon pump (or a hose if available) to fill the tank to the
desired level with municipal water.
Do not overfill your WaterRower. Anything beyond Level 19 (the maximum
level) may risk leaking and void the warranty.
WATER LEVEL -
The Level Gauge is positioned on the side of the tank. Information
on the sticker includes WaterRower contact information and the Water Level
Gauge. The maximum level to fill the tank is Level 19. DO NOT fill above the
maximum level - this could void the warranty. The standard Calibration Level is
Level 17.
Button Head Screw x 4