WaterRower M1 SERIES Owner's Manual - page 14
of
28
14
STEP 8
Place the Footboard between the Rails.
STEP 9
Connect the base of the Footboard to the Rails using 2 of the Button Head
Screws.
The bolt goes into the rail through the Spacer on the inside of the Footboard,
similar in fashion to Step Four.
STEP 10
Tilt the Footboard forward so it meets up with the Top Deck and the front of
the Tank Assembly Cover.
Attach the top of the Footboard to the Top Deck using the 2 Handle Rest Bolts
and Handle Rests.
Handle Rest x 2
Handle Rest Bolt x 2
Button Head Screw x 2