WEG MW500 User Manual - page 29

MW500 | 23 

Keypad (HMIR) and Basic Programming 

- English -

NOTE!

When the drive is in the fault state, the main display indicates the number 

of the fault in the format 

Fxxxx. The browsing is allowed after the activation 

of the key ESC, and the indication 

Fxxxx goes to the secondary display 

until the fault is reset.

NOTE!

When the drive is in the alarm state, the main display indicates the number 

of the Alarm in the format 

Axxxx. The browsing is allowed after the 

activation of any key, and the indication 

Axxxx goes to the secondary 

display until the situation causing the alarm is solved.

NOTE!

A list of parameters is presented in the quick reference of the parameters. 

For further information about each parameter, refer to the programming 

manual of the MW500.