WEG MW500 User Manual - page 52
Manual is about: Frequency inverter
of
53
Appendix C
A
pp
end
ix
C
46 | MW500
APPENDIX C – MOUNTING INSTRUCTIONS
Integrate Mounting Instructions
Step
Action
Step
Action
1
3
Install the motor wires using the connector
provided with the motor.
Place and fasten the drive onto the
intermediate adaptation box with 4 drive
screws.
2
4
Place and fasten the motor seal on the
motor with 4 screws.
Connect the motor wire to the push-in motor
terminal block (X2).
Figure C.1: Integrate mounting instructions