1. DL manuals
  2. Xerox
  3. Software
  4. 6100BD - Phaser Color Laser Printer
  5. Install Manual

Xerox 6100BD - Phaser Color Laser Printer Install Manual

Manual is about: Using LCDS Print Description Language

Summary of 6100BD - Phaser Color Laser Printer

  • Page 1

    Xerox production services platform series docutech 61xx installation planning guide 701p38839 docusp 3.6 august, 2002.

  • Page 2

    Xerox corporation global knowledge and language services 800 phillips road building 845-17s webster, new york 14580 © 2002 by xerox corporation. All rights reserved. Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judici...

  • Page 3: Table Of Contents

    Docutech 61xx installation planning guide i table of contents 1. Introduction 1-1 about this guide 1-1 contents 1-1 customer support 1-2 2. Overview 2-1 functional overview 2-1 docutech system components 2-1 docusp controller hardware specifications 2-2 docusp software 2-3 client workstations and op...

  • Page 4

    Table of contents ii docutech 61xx installation planning guide before scheduling delivery of the docutech system 3-3 after scheduling delivery 3-3 on the day of delivery and installation 3-4 after installation of the docutech system 3-4 4. Select and prepare an installation site 4-1 space requiremen...

  • Page 5

    Table of contents docutech 61xx installation planning guide iii network protocols 4-14 telephone requirements 4-14 customer support 4-14 modem 4-14 environmental requirements 4-15 temperature, humidity, and altitude specifications 4-15 heat management 4-16 heat produced by selected components and sy...

  • Page 6

    Table of contents iv docutech 61xx installation planning guide your responsibilities 5-2 6. Maintenance and support services 6-1 xerox support services 6-1 customer support 6-2 operator training 6-2 supplies service 6-3 routine maintenance 6-4 meter reading and reporting 6-4 consumable supplies tabl...

  • Page 7: Introduction

    Docutech 61xx installation planning guide 1-1 1. Introduction this xerox document services platform series docutech 61xx installation planning guide contains information on preparing for the delivery and installation of the xerox docutech 6100, 6115, 6135, 6155, or 6180 printer. About this guide thi...

  • Page 8

    Introduction 1-2 docutech 61xx installation planning guide • chapter 3, "select and prepare an installation site," contains information about the requirements a site must meet for the docutech 61xx system to be installed. Electrical specifications and space planning diagrams are provided to help you...

  • Page 9: Overview

    Docutech 61xx installation planning guide 2-1 2. Overview this chapter is an overview of the hardware and software for the xerox docutech printer. Functional overview the docutech system enables personal computer (pc), sun workstation, and apple macintosh users to print postscript (levels 1, 2, and ...

  • Page 10

    Overview 2-2 docutech 61xx installation planning guide docusp controller hardware specifications docusp controller hardware consists of the following components and features: • monitor: either – 21-inch (533mm) color monitor – 17-inch flat panel viewsonic • cartridge tape drive (optional) – 8gb, 4mm...

  • Page 11

    Overview docutech 61xx installation planning guide 2-3 – sun blade 1000 one (6100/6115/6135) or two (6155/6180) 750 mhz processors one 36 gb disk drive one gb ram per processor printer interface boards: docutech 6100/6115/6135 - 1 or optionally 2 pdcimu2a boards docutech 6155/6180 - 2 pdcimu2a board...

  • Page 12

    Overview 2-4 docutech 61xx installation planning guide client workstations and operating system software to send print jobs to the docutech printer, you must provide the proper client hardware and operating system software. In addition to the xerox client software, third-party tcp/ip or ipx/ spx net...

  • Page 13

    Overview docutech 61xx installation planning guide 2-5 – novell ipx/spx network client. This protocol requires that your network has a novell server. • apple macintosh, system 8.6 or higher with ethertalk phase 2. Note: docusp software may be compatible with workstation models and software versions ...

  • Page 14

    Overview 2-6 docutech 61xx installation planning guide.

  • Page 15

    Docutech 61xx installation planning guide 3-1 3. Planning for the installation this chapter is an overview of the planning process involved when installing a docutech 61xx printer. Installation planning responsibilities this section describes your responsibilities and the responsibilities xerox has ...

  • Page 16

    Planning for the installation 3-2 docutech 61xx installation planning guide customer responsibilities your responsibilities prior to, during, and after installation of the docutech printer are: site personnel identify a person at your site to be the primary interface with xerox. Site selection and p...

  • Page 17

    Planning for the installation docutech 61xx installation planning guide 3-3 before scheduling delivery of the docutech system the following activities should be completed before you schedule a delivery date for the docutech system: • select a location for the docutech system. • prepare the site: – i...

  • Page 18

    Planning for the installation 3-4 docutech 61xx installation planning guide refer to the section, "ordering supplies for the installation", in chapter 3 for specific information on the required supplies. • register with xerox documentation and software services. Order additional documentation if req...

  • Page 19: Site

    Docutech 61xx installation planning guide 4-1 4. Select and prepare an installation site this chapter assists you in selecting a suitable location for installing your docutech system. You should consider the following factors when deciding where to place the printer: • adequate work space and servic...

  • Page 20

    Select and prepare an installation site 4-2 docutech 61xx installation planning guide room dimensions required for a single docutech installation the printer must be installed in a fixed location that provides the following clearance space: • 36 inches (910 mm) of clearance in back of each component...

  • Page 21

    Select and prepare an installation site docutech 61xx installation planning guide 4-3 single docutech system with an interposer when installing a single docutech system with the optional interposer module, the clearance space shown in the following diagram must be maintained..

  • Page 22

    Select and prepare an installation site 4-4 docutech 61xx installation planning guide room dimensions required for multiple docutech installation when multiple docutech systems are installed in one room, part of the required clearance space can be shared between the systems. When sharing space, the ...

  • Page 23

    Select and prepare an installation site docutech 61xx installation planning guide 4-5.

  • Page 24

    Select and prepare an installation site 4-6 docutech 61xx installation planning guide back to back the following figure illustrates the minimum required clearance space when two docutech systems are installed in a back-to- back orientation. In this configuration, the shared operator/ service space i...

  • Page 25

    Select and prepare an installation site docutech 61xx installation planning guide 4-7 mobility assist device the optional mobility assist device is a rail system that enables a xerox service representative to move the printer along its long axis during service. This reduces the installation clearanc...

  • Page 26

    Select and prepare an installation site 4-8 docutech 61xx installation planning guide you need to review these issues prior to, or at the time of, the site inspection conducted by your xerox service representative. Required passage and doorway width although the passageways may be wide enough to all...

  • Page 27

    Select and prepare an installation site docutech 61xx installation planning guide 4-9 *the finisher module is smaller than the separated processor module. If there is sufficient passage width for the processor module, there also will be sufficient clearance for the finisher module. Electrical requir...

  • Page 28

    Select and prepare an installation site 4-10 docutech 61xx installation planning guide note: the power lines that provide electrical service for the docutech printer can not be shared with other devices. Electrical requirements for 60 hertz systems the type of electrical service that is installed de...

  • Page 29

    Select and prepare an installation site docutech 61xx installation planning guide 4-11 this configuration consists of one 120/208 vac, 3 wires plus ground, 50 amp, 2-phase power, and one 120/208 vac, 3 wires plus ground, 30 amp, 2-phase power cords. The following kits must be ordered through your xe...

  • Page 30

    Select and prepare an installation site 4-12 docutech 61xx installation planning guide • 32 amps per phase • if you have existing 3-phase, 220/230 vac, 25 amp/phase electrical service, or plan to have this service installed, it must meet the following specifications: 30 amps per phase minimum – line...

  • Page 31

    Select and prepare an installation site docutech 61xx installation planning guide 4-13 power cable lengths power cables supplied with the docutech printer are of sufficient length to meet the needs of most installations. Some of these cables are specific lengths to conform to engineering and safety ...

  • Page 32

    Select and prepare an installation site 4-14 docutech 61xx installation planning guide network hardware the ethernet interface on the docusp controller is a 10/100 mb per sec twisted pair standard (10baset or 100base t). Attachment unit interface (aui) coax ethernet is enabled with an optional adapt...

  • Page 33

    Select and prepare an installation site docutech 61xx installation planning guide 4-15 • standard rj11 (6-position, 4-connector) phone wall jack. The phone wall jack must be installed within 6 feet (2 meters) of the controller. • any third-party telephone company that may be involved must be contact...

  • Page 34

    Select and prepare an installation site 4-16 docutech 61xx installation planning guide heat management the docutech system produces significant amounts of heat when running in a production environment. The heat produced by the system must be planned for when selecting a suitable location for the sys...

  • Page 35

    Select and prepare an installation site docutech 61xx installation planning guide 4-17 use the following table to find the appropriate system and venting configuration in the column labeled: replaced system. Read across that row to find the heat output for that system. Record this value on the heat ...

  • Page 36

    Select and prepare an installation site 4-18 docutech 61xx installation planning guide • system environmental requirements. 3. Complete the heat management worksheets. 4. Is the temperature acceptable? • if yes, no changes are required. • if no, go to the next step. 5. Determine if reserve cooling c...

  • Page 37

    Select and prepare an installation site docutech 61xx installation planning guide 4-19 calculate the change in heat load use the following table to calculate the change in heat load to the room. Proceed to the next section to calculate the resulting change in room temperature. Calculate the change i...

  • Page 38

    Select and prepare an installation site 4-20 docutech 61xx installation planning guide figure 4-1. Room temperature change 8a. The figure “room temperature change (system replaced)” is used to estimate the change in room temperature when the docutech is added to a room. The figure is used to locate ...

  • Page 39

    Select and prepare an installation site docutech 61xx installation planning guide 4-21 figure 4-2. Room temperature change (system replaced).

  • Page 40

    Select and prepare an installation site 4-22 docutech 61xx installation planning guide figure 4-3. Room temperature change (no system removed or replacement exceeds 16,000 btus).

  • Page 41

    Select and prepare an installation site docutech 61xx installation planning guide 4-23 figure 4-4. Exacfm capacity required to maintain present room temperature heat management alternatives the change in room temperature that was determined from the heat management worksheets can be eliminated or re...

  • Page 42

    Select and prepare an installation site 4-24 docutech 61xx installation planning guide explore the reserved building capacity consult the site hvac engineer or contractor to determine if the added heat load can be managed by means of reserved cooling capacity available from the building source. This...

  • Page 43

    Select and prepare an installation site docutech 61xx installation planning guide 4-25 heat vent kits if heat output for the docutech without the heat vent kits was assumed, use the heat output value with the vent kits and recalculate the heat management worksheets. The combination of vent kits and ...

  • Page 44

    Select and prepare an installation site 4-26 docutech 61xx installation planning guide ordering supplies for the installation you need to order consumable supplies (those that are depleted during operation of the printer), such as paper, dry ink, developer, fuser agent, stitcher wire, and binder tap...

  • Page 45

    Select and prepare an installation site docutech 61xx installation planning guide 4-27 • lightest: 20-pound or 75-gsm • heaviest: 110-pound or 200-gsm. Paper is fed into the printer with the long side as the leading edge. When you purchase paper, buy long-grain paper. Make sure the grain is parallel...

  • Page 46

    Select and prepare an installation site 4-28 docutech 61xx installation planning guide fuser agent fuser agent is a consumable item required by the printer. You should keep at least one bottle on hand for installation by the service representative. The consumption rate of xerox fuser agent is approx...

  • Page 47

    Select and prepare an installation site docutech 61xx installation planning guide 4-29 binder tape when a docutech job requires bound output, the binder presses a length of pre-glued paper tape along the edge of the print set, and with heat and pressure securely binds the adhesive tape to the set. B...

  • Page 48

    Select and prepare an installation site 4-30 docutech 61xx installation planning guide.

  • Page 49: Installation

    Docutech 61xx installation planning guide 5-1 5. Installation this chapter describes the activities you and xerox perform during the installation of the xerox docutech hardware and software components. Before installation can begin, you must complete the tasks described in the “select and prepare an...

  • Page 50

    Installation 5-2 docutech 61xx installation planning guide 6. Xerox personnel schedule comprehensive customer training (2 to 3 days). 7. Xerox personnel review preventive maintenance schedules and service call procedures. Your responsibilities xerox is responsible for the physical installation of th...

  • Page 51

    Docutech 61xx installation planning guide 6-1 6. Maintenance and support services after the installation of your docutech printer, there are a few ongoing tasks that must be performed. These tasks may include all or some of the following: • maintaining an adequate inventory of consumable supplies • ...

  • Page 52

    Maintenance and support services 6-2 docutech 61xx installation planning guide customer support the customer support center is available to address your applications problems or to direct you to the appropriate documentation. The key to effective use of the support center is correct identification o...

  • Page 53

    Maintenance and support services docutech 61xx installation planning guide 6-3 supplies service to avoid downtime, always have an adequate amount of the necessary supplies. To do this, you need to establish a procedure for checking and ordering supplies. A supplies checklist is provided at the end o...

  • Page 54

    Maintenance and support services 6-4 docutech 61xx installation planning guide parts marketing center building 214-07s p.O. Box 1020 webster ny 14580 please provide the following information when placing orders: • your customer number (provided by your sales representative) • your docutech printer m...

  • Page 55

    Maintenance and support services docutech 61xx installation planning guide 6-5 during the last five working days of each month, you need to review and transmit the data to xerox for billing purposes. Refer to the section on billing in the help on the docusp controller for complete information on how...

  • Page 56

    Maintenance and support services 6-6 docutech 61xx installation planning guide 8.5 x 11 inch dual purpose colors, blue, 3-hole 3r3068 8.5 x 14 inch dual purpose colors, blue 3r3084 8.5 x 11 inch dual purpose colors, green 3r3056 8.5 x 11 inch dual purpose colors, green, 3- hole 3r3072 8.5 x 14 inch ...

  • Page 57

    Maintenance and support services docutech 61xx installation planning guide 6-7 8.5 x 11 inch 10 series smooth 3r54 8.5 x 14 inch 10 series smooth 3r83 8.5 x 11 inch 4024 dual purpose, reinforced 3- hole 3r2057 image lx (laser xerographic paper) white 8.5 x 11 inch (5000 sheets/ carton 3r3874 image l...

  • Page 58

    Maintenance and support services 6-8 docutech 61xx installation planning guide use the following table to help record the supplies and accessories you require, the date on which the order should be placed, and the actual date of the order. Stitcher wire packaged 1 reel per carton. Consumption rate i...

  • Page 59

    Maintenance and support services docutech 61xx installation planning guide 6-9 stitcher wire labels transparencies cleaning supplies other table 6-2. Supplies checklist item description quantity date of order date ordered.

  • Page 60

    Maintenance and support services 6-10 docutech 61xx installation planning guide.