Xerox DocuPrint P14 User Manual - page 125
Manual is about: Personal Laser Printer
of
133
Memory and PostScript SIMMs
Appendix D: Printer Options
❖
D-5
3
Remove the retaining screw from the metal shield. Slide
the metal shield in the direction of the arrow marked on
the cover, then remove the shield.
4
Unpack the SIMM. Avoid touching the connection points
along its edge.
5
Locate the PostScript SIMM slot
➊
and the memory SIMM
slot
➋
on the control board. They are not interchangeable.
6
Hold the SIMM so that the notch
➊
and connection
points
➋
are aligned with the slot as shown.
7
Insert the SIMM all the way into the connector at a 30
o
angle, and rotate it down until it snaps into place.
OPE
N
CLO
SE