Xerox DocuPrint P14 User Manual - page 61
Using Printer Utilities
Chapter 3: Printing
❖
3-11
•
Power Save
determines the length of time the printer
waits after a job is printed before it goes to a reduced
power state. If the printer is used frequently, select OFF
which keeps the printer ready to print with the
minimum warm-up time. This uses more electricity to
keep the printer warm and ready to print.
•
Econo Mode
determines the toner quantity the printer
should use when printing. If set to
ON
, the printer
conserves toner when printing. The default value is
OFF
, which provides 100% usage
•
Fast Print
turns the fast print mode on or off.
JOB
Use this tab to control the following printer features:
•
Timeout
determines the amount of time (in seconds)
the printer will wait before printing the last page of a
print job that does not end with a command to print the
page or a formfeed character.
•
Paper Type
provides the printer with information
about the type of paper to be used for a print job. If you
use paper with a weight of more than 42 lb. (90 g/m
2
),
or an envelope, set this to
THICK
and use the MSF’s
manual feed slot.
•
Density
determines the overall density of the printed
image.
•
Memory Enhancement
mode makes the printer
process more data by optimizing the memory. When
set to
ON
, the complex data can be processed.