Xerox DocuPrint P14 User Manual - page 70

Using the Printer’s Control Panel

3-20

❖

DocuPrint P14 User Guide

Cover open or no cartridge

If the ERROR light is on, the printer has 

experienced an error.

Things to Check For:

• The printer cover is open or not closed 

securely.

• The laser print cartridge is either missing 

or not installed.

Overrun or memory overflow

If the ERROR light blinks for a while, then 

only the READY light comes on, the printer 

has insufficient memory to process the job.

The printer will print a page, telling you the 

error status. Simplify the page layout and 

remove any unnecessary graphics. Or, you 

could add more memory.

System error

If all lights blink, the printer may have a 

system error.

Turn the printer off and back on. If the 

printer is still not operating properly and all 

lights blink, you have to call for service. 

Contact Xerox or your authorized Xerox 

reseller.

Table 3.1

Indicator Lights

 (continued)

Indicators

Status/Condition

Table 3.1 Page 4 of 4