Xerox DocuPrint P14 User Manual - page 72

Using the Printer’s Control Panel

3-22

❖

DocuPrint P14 User Guide

Self test

The printer should be on-line, i.e., the 

READY light is on and the other lights are 

off.

Press and hold the button for about four 

seconds until all lights blink briefly, then let 

go of the button.

The configuration sheet will print.

Form feed

If the READY light is blinking slowly and the 

printer does not print any image, there is 

unprinted data in the printer. To print the 

remaining data, press and hold the button 

for about four seconds while the READY 

light is blinking.

Print quality 

adjustment

If you are getting streaks or spots on your 

prints, the printer’s OPC drum may need to 

be cleaned.

Press and hold the button for about ten 

seconds until all lights blink briefly, then let 

go of the button. After cleaning the printer, 

one cleaning sheet will print.

If the printer determines that a 

cleaning of its OPC drum is 

necessary, it will automatically print a 

Print Quality Adjustment page during 

the course of a normal print job.

Table 3.2

Button Functions

 (continued)

Function

Description

Table 3.2 Page 2 of 2