Xerox DocuPrint P14 User Manual - Powering On
Manual is about: Personal Laser Printer
of
133
Printer Setup
Chapter 1: Getting Started
❖
1-21
Powering On
the Printer
1
Plug one end of the power cord into the connector on the
printer.
2
Plug the other end into a properly grounded AC outlet.
3
Turn the printer on.
As the printer powers up, all control panel lights turn on
briefly. Then the lights scroll sequentially several times as
the printer goes through its internal diagnostics.
4
When only the READY light is steadily on (as shown at
left), press the control panel button for five seconds, then
let go. A configuration sheet should print out (if not,
recheck the installation).
The configuration sheet lists your printer model
and default settings along with the interface
ports available for your printer model.
Continue to the next section,