Xerox DocuPrint P14 User Manual - Printing A Document
Printing a Document
3-2
❖
DocuPrint P14 User Guide
Printing a Document
The following procedure describes the general steps
required for printing from various Windows applications.
The exact steps for printing a document may vary
depending on the application program you are using.
Refer to your software application’s documentation for the
exact printing procedure.
1
Start the program you are using to create the document,
and open the document you want to print.
2
Select
from the
File
menu.
The Print dialog box appears.
Most Windows applications allow you to make
changes to the print settings, such as number of
copies, sequence of the pages, paper orientation,
and margins.
If you go to the File>Print>Properties dialog
box, you’ll access the printer driver’s Print Setup
dialog box, in which you can set other printer
properties. For Windows 3.1x, the equivalent
command is File>Print>Setup>Options. See the
section “Setting Properties” (page 3-4). When
done, click
OK
to close the Print Setup dialog
box.
3
After making any necessary changes to the print settings,
click
OK
to start the print job.
To use your DocuPrint P14, you must install a printer
driver, described in Chapter 1: Getting Started. The way
you access the printer driver varies depending on the
software programs you use.
To use the PostScript driver, you must install the PostScript
option, described in Appendix D: Printer Options.