Xerox DocuPrint P14 User Manual - Connecting To The
Printer Setup
1-16
❖
DocuPrint P14 User Guide
Connecting to the
Computer
Your printer can be connected to a Windows-based PC or
to an Apple Macintosh computer (see the note, below).
Refer to Table 1.1 for your connection options and the
appropriate page in this manual for connection
instructions.
Table 1.1 Interface options
Interface
Windows PC
Macintosh
Parallel
Yes (see page 1-17).
Not available.
USB
Yes (see page 1-18).
Yes (see page 1-18).
Serial
*
Yes (see page 1-19).
Yes (see page 1-19).
LocalTalk
Not available.
Yes (see page 1-20).
*
Requires installation of the optional Serial/LocalTalk interface board. Refer to the Supplies/Options Guide that
came with your printer, and to
for installation instructions.
To print documents from a Macintosh computer, you must
install the following optional printer accessories:
•
PostScript SIMM
•
Additional memory SIMM (12MB is required)
•
Serial/LocalTalk interface board (if your Macintosh
does not have a USB port)
If you do not have these accessories, refer to the Supplies/
Options Guide that came with your printer, or contact your
authorized Xerox dealer. Installation instructions for these
options can be found in Appendix D: Printer Options.
Once you have installed the required options and connected
your printer, you will need to install the PostScript printer
driver. This driver is provided on the CD-ROM that came
with your printer. Installation instructions are provided in