Xerox Phaser 6120 Service Manual - Paper Take-Up Unit
Disassembly/Assembly Procedures
Phaser® 6120 Color Laser Printer Service Manual
5-23
15.
Press the Rack Release Lever and turn the Rack so that the screw securing the Laser (PH)
Unit to the chassis can be accessed through the hole [12] in the metal cross plate.
16.
Remove three screws [12] and the Laser (PH) Unit [13].
Precautions for Reinstallation of the Laser (PH) Unit
Warning:
When reinstalling the Laser (PH) Unit, make sure that you insert the lever [14] of
the Laser (PH) shutter into the lever of the machine [15].
Note:
■
Reconnect the blue connector (S5) before you reinstall the cover onto the printer.
■
To reinstall the ribbon cable, loosen the lower tab on the plastic air duct to give access
to the route.
Paper Take-Up Unit
1.
Remove the Rear Cover. See
2.
Remove the Right Cover. See
3.
Remove the Left Cover. See
4.
Remove the High Voltage Unit. See
[12]
[13]
[12]
4139fs2037c2
[15]
[14]
4139fs2539c0