Xerox Phaser 6120 Service Manual - page 62
Index of Control Panel Messages
Phaser® 6120 Color Laser Printer Service Manual
3-6
Index of Control Panel Messages
Standard Status Messages
Normal state messages are displayed on the upper line of the LCD.
Message
Description
READY
Ready to print
WARMING UP
Warming up
INITIALIZING
The printer is being initialized.
ENERGY SAVER
Energy Saver mode
CANCELLING JOB
Canceling a job
PROCESSING
A print job is being processed.
PRINTING
(XXX/XXX)
The machine is printing with the collating function.
IMAGE ADAPT
QUALITY DOWNGRADE
FIRMWARE UPDATE
WRITING IMAGE
The firmware is being updated.
FIRMWARE UPDATE
FORMATTING
UPDATE FIRMWARE
READING IMAGE
STARTING SYSTEM
FIRMWARE IMAGE
CALIBRATING
Calibrating
Whenever you replace a toner cartridge or reboot the printer after making an
temperature/humidity environmental change, the printer automatically
pauses to do an Automatic Image Density Control (AIDC) cycle. This process
is provided to make reliable printer operation with optimum output quality
possible.
Warning Messages
Message
Description
IMAGING UNIT LOW
This message is displayed when the usage becomes 4% or under.
CYAN LOW
This is displayed when the usage becomes 4% or less for 4.5K cartridge and
12% or under for 1.5K cartridge. And this status is cleared when the usage
becomes 0%.
MAGNETA LOW
This is displayed when the usage becomes 4% or less for 4.5K cartridge and
12% or under for 1.5K cartridge. And this status is cleared when the usage
becomes 0%.
BLACK LOW
This is displayed when the usage becomes 4% or less for 4.5K cartridge and
12% or under for 1.5K cartridge. And this status is cleared when the usage
becomes 0%.
YELLOW LOW
This is displayed when the usage becomes 4% or less for 4.5K cartridge and
12% or under for 1.5K cartridge. And this status is cleared when the usage
becomes 0%.
DISK NEAR FULL
The hard drive is nearly full.