Xerox Phaser 6120 Service Manual - Fuser
of
366
Maintenance Procedures
Phaser® 6120 Color Laser Printer Service Manual
2-14
Fuser
Warning:
Before replacing the Fuser, ensure that it has had time to cool down.
Replacement Procedure
1.
Remove the Rear Cover. See
2.
Remove the Left Cover. See
3.
Remove the screws securing the metal plate, and then remove the plate [1].
4.
Disconnect two connectors (PJ6, PJ71) [2] from the PWB-A (Engine Control Board) [1].
5.
Disconnect the two connectors [4] (black and white) of the Fusing Safety Switch [3].
shield_plate
[1]
[2]
[1]
4139fs2005f0
[4]
[3]
4139fs2006c1