Yamaha TG500 Owner's Manual - 1-3: Filter
100
VOICE EDIT MODE / 1: Quick Edit
1-3: FILTER
1-3: FILTER
The simplified filter parameters provided here have been specifically created for
fast, efficient filter programming.
For full filter parameters see page 119.
VCE QED Filter
0
9:Sweep 127 71 +45
Type
(Filter type)
Range: 0 … 15
Selects either the filter defined by the current filter parameter settings
(page 119), or one of 15 preset filter types for the current voice. The filter
types are:
Quick Edit Filter Types
00:--------
Full-edit filter.
01:VeloSoft
Velocity sensitive, soft response.
02:VeloWide
Velocity sensitive, wide response.
03:VeloHard
Velocity sensitive, hard response.
04:VeloReso
Velocity sensitive, resonant.
05:SynBass1
Synthesizer bass 1.
06:SynBass2
Synthesizer bass 2.
07:SynBras1
Synthesizer brass 1.
08:SynBras2
Synthesizer brass 2.
09:Sweep
Sweep-frequency filter.
10:SlowAtak
Slow-attack filter.
11:LPF_Init
Initialized LPF.
12:HPF_Init
Initialized HPF.
13:BPF_Init.
Initialized BPF.
14:BEF_Init
Initialized BEF.
15:Thru
No filter.
Cof
(Cutoff frequency)
Range: 0 … 127
Sets the cutoff frequency of the selected filter.
Lower cutoff values produce a lower cutoff frequency and higher values
produce a higher cutoff frequency. If the “Thru” filter type is selected, no
cutoff frequency can be set and “---” appears on the display in place of the
parameter.
Type
Cof
Res Vel
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 1: Quick Edit -> [ENTER] -> [PAGE]
-> 1-3 : Filter -> [ENTER]