Yamaha TG500 Owner's Manual - Installation of The Syemb06

282

Appendix

EFFECTS

Turn the TG500 power switch off and

disconnect the AC power cord from the

main outlet.

Locate the small cover on the top of

the TG500 and remove the two screws that

hold it in place (Figure 1).

Below the cover you will see a recessed

panel (Figure 2). When installing a single

SYEMB06 use slot number 1. Install a

second SYEMB06 in slot number 2.

Replace the cover and secure it with the

screws you removed in step 2.

Installation of the SYEMB06

Expansion Memory Board

Installation of the SYEMB06 Expansion Memory Board

1

2

3

4

SYEMB06

Cover

Figure  1

Figure  2

The wave memory must be initialized after installation of the SYEMB06.

WARNING: Installation of a SYEMB06 may cause the internal data to be damaged.

Backup the internal data before installation.