Yamaha TG500 Owner's Manual - 2-1: Midi Control

223

UTILITY MODE / WAVE EDIT MODE / 2: Controller

2-1: MIDI CONTROL

2-1: MIDI CONTROL

The four parameters provided in this screen allow any MIDI control device num-

bers to be assigned to TG500 controllers 1, 2, 3, and 4 (MC1, MC2, MC3, and

MC4).

UTL CTRL MC   (Mod.Whl.)

 1:001 2:004 3:018 4:109

MIDI Controllers 1 … 4

Range:  000  …  119

Position the cursor at the controller number you want to assign (TG500

controller numbers appear to the left of the colon in each parameter), then use

the [-1/NO] and [+1/YES] keys to assign the desired MIDI control change

number. Some controller numbers are assigned to specific control devices (see

list below), while others have no specific controller assignment. If a control

device is assigned to the selected MIDI control number, an abbreviation of the

device name appears in parentheses in the upper right corner of the display.

For example, set the controller 1 parameter to “001” if you want the modu-

lation wheel on the keyboard connected to the TG500 to function as Controller

1 (“MC1”).

Controllers 1 ... 4

[UTILITY/SELECT] -> 2: Controller -> [ENTER] -> [PAGE] -> 2-1: MIDI Control -> [ENTER]