Yamaha TG500 Owner's Manual - ■ Power-On Procedure

1. Setting Up Your System

15

DEMO PLAY 1:R.Y.O

 Press [ENTER] to start

2

Select a DEMO and press [ENTER].

Use the [-1/NO] and [+1/YES] keys to select one of the three demo se-

quences provided, then press [ENTER] to start playback.

DEMO PLAY 1:R.Y.O

 Press [EXIT] to stop

3

Press [EXIT] to stop playback.

Press [EXIT] when you want to stop playback. You can now select and

play a different demo, or press [EXIT] again to exit from the demo mode.

■ Power-on Procedure

Believe it or not, there’s actually a “right” way to turn on a sound system

that will minimize the possibility of damage to the equipment (and your ears!).

1

Make sure your sound system’s volume control and the TG500 volume

control are turned all the way down prior to turning power on.

2

Turn on your keyboard or other MIDI controller.

3

Turn on the TG500.

4

Turn on the sound system.

5

Raise the sound system volume to a reasonable level.

6

Gradually raise the TG500 VOLUME control while playing the keyboard/

controller to set the desired listening level.