Yamaha TG500 Owner's Manual - 3-1-12: Layer Initialize

73

3-1-12: LAYER INITIALIZE

When you want to program a totally new performance combination “from

scratch,” rather than editing an existing combination, use this function to initialize

layer data.

PERFORMANCE EDIT MODE / 3: Full Edit. 3-1: Layer

3-1-12: LAYER INITIALIZE

PFM Layer Init          

             Layer= al

l 

Use the [-1/NO] and [+1/YES] keys to select “all” if you want to initialize layer

data currently in the edit buffer, or select “A”, “B”, “C”, or “D” if you only want to

initialize one specific layer.

Press [ENTER] to begin the initialize procedure. The following confirmation

display will appear:

PFM Layer Init     Sure?

             Layer= all 

Press [+1/YES] to confirm that you want to go ahead with the initialize operation

(which will erase all current edited data), or press [-1/NO] to cancel.

“Completed!” will appear briefly on the display when the layer data has been

initialized.

For initial layer data, see page 283.

[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-1:Layer -> [ENTER]         

->  [PAGE] -> 3-1-12 : Initialize -> [ENTER]