Yamaha Ultramatic GRIZZLY 660 Owner's Manual - page 106
Other manuals for Ultramatic GRIZZLY 660:
Owner's Manual, Owner's Manual
of
174
8-13
8
To install the panel
1. Place the panel in the original position and in-
stall the quick fasteners.
2. Install the front carrier by installing the bolts
and tightening them to the specified torques.
3. Install the stay covers.
Panel E
To remove the panel
Remove the bolts, and then take the panel off.
To install the panel
Place the panel in the original position and install
the bolts.
Panel F
To remove the panel
Pull outward on the areas shown.
1. Quick fastener
2. Panel C
Tightening torques:
Carrier bolt (top):
26 Nm (2.6 m·kgf, 19 ft·lbf)
Carrier bolt (under fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1. Panel E
2. Bolt
U2C612E0.book Page 13 Wednesday, March 8, 2006 10:15 AM