Yamaha Ultramatic GRIZZLY 660 Owner's Manual - page 120
8-27
8
●
If the engine overheats, see page 8-57 for fur-
ther instructions.
EBU23591
To change the coolant
WARNING
EWB01880
1. Place the ATV on a level surface.
2. Remove panels E and F. (See page 8-9.)
3. Place a container under the engine, and then
remove the coolant drain bolt. (Use a trough
or a similar object as shown to prevent coolant
from spilling on the footrest.)
4. Remove the front carrier and panel C. (See
page 8-9.)
POTENTIAL HAZARD
Removing the radiator cap when the engine
and radiator are still hot.
WHAT CAN HAPPEN
You could be burned by hot fluid and steam
blown out under pressure.
HOW TO AVOID THE HAZARD
Wait for the engine to cool before removing
the radiator cap. Always place a thick rag
over the cap. Allow any remaining pressure
to escape before completely removing the
cap.
1. Coolant drain bolt
1. Trough
U2C612E0.book Page 27 Wednesday, March 8, 2006 10:15 AM