Yamaha Ultramatic GRIZZLY 660 Owner's Manual - page 23
4-4
4
EBU18040
Multifunction display
The multifunction display is equipped with the fol-
lowing:
●
a speedometer (which shows the riding speed)
●
an odometer (which shows the total distance
traveled)
●
two tripmeters (which show the distance trav-
eled since they were last set to zero)
●
a clock
●
an hour meter (which shows the total time the
key has been turned to “ON”)
●
a fuel meter
Odometer and tripmeter modes
Pushing the “TRIP/ODO” button switches the dis-
play between the odometer mode “ODO” and the
tripmeter modes “A” and “B” in the following order:
ODO
→ TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
“TRIP/ODO” button, and then push the
“TRIP/ODO” button for at least three seconds. The
tripmeters can be used to estimate the distance
that can be traveled with a full tank of fuel. This in-
formation will enable you to plan future fuel stops.
NOTE:
Holding in the “TRIP/ODO” button and then turning
the key to “ON” switches the display between
“mph” and “km/h”.
1. Speedometer
2. Fuel meter
3. “H” button
4. “M” button
5. Clock/Hour meter
6. Odometer/Tripmeter A/Tripmeter B
7. TRIP/ODO button
8. Clock/Hour “
”/“
” button
U2C612E0.book Page 4 Wednesday, March 8, 2006 10:15 AM