Yamaha Ultramatic GRIZZLY 660 Owner's Manual - page 28
4-9
4
WARNING
EWB00120
EBU18242
On-Command differential gear lock switch
“4WD”/“LOCK”
This ATV is equipped with a switch allowing you to
lock the differential gear when in four-wheel drive.
Select the appropriate switch position according to
the terrain and the conditions.
●
“4WD” (four-wheel drive): Power is supplied to
the rear and front wheels.
●
“LOCK” (four-wheel drive with the differential
gear locked): Power is supplied to the rear and
front wheels and the differential gear is locked.
Unlike in four-wheel drive, all wheels turn at the
same speed.
POTENTIAL HAZARD
Changing from two-wheel drive to four-
wheel drive or from four-wheel drive to two-
wheel drive while the ATV is moving.
WHAT CAN HAPPEN
The ATV handles differently in two-wheel
drive than in four-wheel drive in some cir-
cumstances. Changing from two-wheel drive
to four-wheel drive or from four-wheel drive
to two-wheel drive while moving may cause
the ATV to unexpectedly handle differently.
This could distract the operator and in-
crease the risk of losing control and of caus-
ing an accident.
HOW TO AVOID THE HAZARD
Always stop the ATV before changing from
two-wheel drive to four-wheel drive or vice-
versa.
1. On-Command four-wheel-drive switch “2WD”/“4WD”
2. On-Command differential gear lock switch “4WD”/“LOCK”
U2C612E0.book Page 9 Wednesday, March 8, 2006 10:15 AM