Yamaha Ultramatic GRIZZLY 660 Owner's Manual - page 138
8-45
8
3. Install the panel.
EBU24890
Checking and lubricating the cables
The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
WARNING
EWB02120
EBU24911
Checking and lubricating the front and
rear brake levers
The operation of the front and rear brake levers
should be checked before each ride, and the lever
pivots should be lubricated if necessary.
1. Brake light switch
2. Brake light switch adjusting nut
Recommended lubricant:
Engine oil
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the cable sheaths
become damaged, and cables can also be-
come frayed or kinked, which could restrict
the operation of controls and lead to an acci-
dent or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace damaged
cables.
Recommended lubricant:
Lithium-soap-based grease (all-purpose
grease)
U2C612E0.book Page 45 Wednesday, March 8, 2006 10:15 AM