Yamaha Ultramatic GRIZZLY 660 Owner's Manual - page 145

8-52

8

3. Remove the headlight bulb holder by pushing

it in and turning it counterclockwise.

4. Remove the defective bulb by pulling it out.

WARNING

EWB02180

5. Insert a new headlight bulb into the bulb hold-

er by pushing it in.

CAUTION:

ECB00650

Do not touch the glass part of the headlight

bulb to keep it free from oil, otherwise the

transparency of the glass, the luminosity of the

bulb, and the bulb life will be adversely affect-

ed. Thoroughly clean off any dirt and finger-

prints on the headlight bulb using a cloth

moistened with alcohol or thinner.

6. Install the bulb holder by pushing it in and turn-

ing it clockwise.

1. Headlight bulb holder

POTENTIAL HAZARD

A headlight bulb is hot when it is on and im-

mediately after it is turned off.

WHAT CAN HAPPEN

You can be burned, or a fire could start if the

bulb touches something flammable.

HOW TO AVOID THE HAZARD

Wait for the bulb to cool before touching or

removing it.

1. Do not touch the glass part of the bulb.

U2C612E0.book  Page 52  Wednesday, March 8, 2006  10:15 AM