Yamaha Ultramatic GRIZZLY 660 Owner's Manual - page 108
Other manuals for Ultramatic GRIZZLY 660:
Owner's Manual, Owner's Manual
of
174
8-15
8
3. Remove the seat under bracket and the panel
by pulling them off.
To install the panel
1. Place the panel and the seat under bracket in
the original position.
2. Install the rear carrier by installing the bolts
and tightening them to the specified torques.
3. Install the seat.
1. Carrier bolt (under the fenders)
1. Seat under bracket
2. Panel G
Tightening torques:
Carrier bolt (top):
26 Nm (2.6 m·kgf, 19 ft·lbf)
Carrier bolt (under fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
U2C612E0.book Page 15 Wednesday, March 8, 2006 10:15 AM