Yamaha Ultramatic GRIZZLY 660 Owner's Manual - page 45
5-2
5
Rear brake
• Check operation. If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
• Check lever free play, and adjust if necessary.
• Check brake pads for wear, and replace if necessary.
• Check brake fluid level in reservoir, and add recommended brake
fluid to specified level if necessary.
• Check hydraulic system for leakage. Correct if necessary.
5-5, 8-38, 8-39, 8-41
Throttle lever
• Make sure that operation is smooth. Lubricate cable and lever hous-
ing if necessary.
• Check cable free play, and adjust if necessary.
5-6, 8-37
Control cables
• Make sure that operation is smooth. Lubricate if necessary.
8-45
Wheels and tires
• Check wheel condition, and replace if damaged.
• Check tire condition and tread depth. Replace if necessary.
• Check air pressure. Correct if necessary.
5-7, 5-8, 5-9
Brake pedal
• Make sure that operation is smooth. Lubricate pedal pivoting point if
necessary.
8-46
Brake levers
• Make sure that operation is smooth. Lubricate lever pivoting points if
necessary.
8-45
Axle boots
• Check for cracks or damage, and replace if necessary.
8-43
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
5-9
Instruments, lights and
switches
• Check operation, and correct if necessary.
5-9
ITEM
ROUTINE
PAGE
U2C612E0.book Page 2 Wednesday, March 8, 2006 10:15 AM