Yamaha VL-1 Owner's Manual - 3: Equalizer Auxiliary

119

Feature Reference

●

Edit Mode

3: Equalizer Auxiliary

•

An inverse “K”(˚) next to a value means that key scaling can be applied to

that parameter. Position the cursor at the appropriate parameter and then press

the ¶ button (“

KSC

”) to go directly to the key scaling page for that param-

eter. You can return to the equalizer auxiliary parameter page by pressing the

] button.

● Input Gain

≤

0 … 127.

Adjusts the level of the input signal to the equalizer stage. The higher the value the

higher the input level.

● HPF Cutoff Freq.

≤

17.0 Hz … 11.2 kHz.

Sets the cutoff frequency of the high-pass filter. Frequency components below the

specified frequency are cut off.

● LPF Cutoff Freq.

≤

31.1 Hz … 24.0 kHz.

Sets the cutoff frequency of the low-pass filter. Frequency components above the

specified frequency are cut off. The low-pass filter is completely bypassed when set to

“off”.

Element Modifier