Yamaha VL-1 Owner's Manual - ● Rsn

124

Feature Reference

●

Edit Mode

● RSN

≤

off, on.

Turns the Resonator stage off or on. When off (and the Impulse Expander, above, is

on) the display will appear as shown below. Only parameters which appear in the dia-

gram are available for editing.

● Dry Level

≤

0 … 127.

Sets the level of the dry signal (i.e. the direct signal which does not pass through

either the Impulse Expander or the Resonator.

● IE Wet Level

≤

0 … 127.

Sets the “wet” output level from the Impulse Expander. The higher the value the

higher the Impulse Expander level.

● IE Level Bal

≤

-64 … 63.

Adjusts the left-right balance of the wet Impulse Expander signal returned to the

stereo signal path. Positive values route more signal to the right channel while negative

values route more signal to the left channel.

● RSN Inp Gain

≤

0 … 127.

Sets the level of the Impulse Expander output signal received at the input of the

Resonator stage. The higher the value the higher the input level.

● RSN Wet Level

≤

0 … 127.

Sets the “wet” output level from the Resonator. The higher the value the higher the

Resonator level.

● RSN Level Bal

≤

-64 … 63.

Adjusts the left-right balance of the wet Resonator signal returned to the stereo

signal path. Positive values route more signal to the right channel while negative values

route more signal to the left channel.