Yamaha VL-1 Owner's Manual - ● 1 Pitch (L Pitch)
50
Feature Reference
●
Edit Mode
● 1 Pitch (L Pitch)
● 2 Pitch (R Pitch)
≤
-12 … 12.
These two parameters individually set the pitch of the first and second pitch-
changed note between one octave below (“
-12
”) and one octave above (“
+12
”) the input
note. When the “
Stereo
” mode is selected, the “
1 Pitch
” parameter applies to the
left channel and the “
2 Pitch
” parameter to the right.
● 1 Fine (L Fine)
● 2 Fine (R Fine)
≤
-100 … 100.
Permit fine tuning of the first and second pitch-changed note in 1-cent steps (1 cent
is 1/100th of a semitone). When the “
Stereo
” mode is selected, the “
L Fine
” param-
eter applies to the left channel and the “
R Fine
” parameter to the right.
● 1 Output (L Output)
● 2 Output (R Output)
≤
0 … 100 %.
Set the output level of the corresponding pitch-changed note. The higher the value
the higher the output level. When the “
Stereo
” mode is selected, the “
1 Output
”
parameter applies to the left channel and the “
2 Output
” parameter to the right.
● Wet/Dry Balance
≤
0 … 100 %.
Sets the balance between the direct (“dry”) and effect (“wet”) sound. Higher values
produce a greater proportion of effect sound in relation to direct sound. When set to “
0
”
no pitch change effect is produced.
Pitch Change