Yamaha VL-1 Owner's Manual - 2: Tg Setting
154
Feature Reference
●
Utility Mode
2: TG Setting
● Master Tuning
≤
-64 … 63.
Fine tunes the overall pitch of the VL1 in approximately 1.17-cent steps (a “cent” is
1/100th of a semitone). The maximum minus setting of “
-64
” produces a downward
pitch shift of almost three-quarters of a semitone, and the maximum plus setting of “
63
”
produces an upward pitch shift of the same amount. A setting of “
0
” produces no pitch
change.
● Reverb
≤
off, on.
Turns the VL1’s internal reverb system off or on. This can be handy if you want to
use an external signal processor for rverberation.
● Output
≤
Monaural, Stereo.
Determines whether the VL1 output is delivered in mono or stereo. When the
“Monaural” setting is selected the same signal is output via the both the L and R OUT-
PUT jacks. Also, in the mono mode all parameters relating to panning or positioning in
the stereo sound field have no effect.