Yamaha VL-1 Owner's Manual - Controller Search & Replace

82

Feature Reference

●

Edit Mode

Controller Search & Replace

This function is accessed by pressing the • button (“

S&R

”) from the element

controller directory page. It provides a fast, convenient way to see which controllers are

assigned to which parameters, and to modify the assignments as required.

1.

 Select the Controller Search & Replace Window

From the element controller directory page, press •.

2.

 Select a Controller

When the “

CONTROLLER SEARCH & REPLACE

” window appears, use the §

and ¶ buttons (“

Prev

” and “

Next

”) to search through the assigned controllers (unas-

signed controllers are not displayed). All parameters assigned to the selected controller

are displayed below the controller name (or number).

•

In this example, only the Pressure parameter is assigned to the Breath Control-

ler:

•

In the following example both Embouchure and Pitch are assigned to the Pitch

bend wheel.

3.

 Make a New Assignment As Required

You can assign a different controller to the parameters shown by using the data dial

or = and - buttons — without cancelling the original assignments. When a

different controller is selected the controller name will flash and any other parameters

assigned to that controller will appear in non-highlighted text.

•

Here, for example, the Pitch Bend controller shown in the previous example

has been replaced with the Breath Attack controller, which is current is

asssigned to the Dynamic Filter.