Yamaha VL-1 Owner's Manual - 4: Equalizer Band
122
Feature Reference
●
Edit Mode
4: Equalizer Band
•
The Equalizer Band block is a 5-band parametric equalizer with frequency, Q
(bandwidth), and level control. The Band block functions in the same way as
any standard parametric equalizer, allowing flexible response control over a
wide range.
● Bnd1 Freq
≤
40.0 Hz … 321.0 Hz.
● Bnd2 Freq
≤
104.0 Hz … 838.0 Hz.
● Bnd3 Freq
≤
284.0 Hz … 2.00 kHz.
● Bnd4 Freq
≤
646.0 Hz … 5.21 kHz.
● Bnd5 Freq
≤
1.54 kHz … 10.0 kHz.
These parameters individually set the center frequencies of the equalizer stage’s five
bands. Note that the bands overlap somewhat for smooth, seamless control.
● Bnd1 … Bnd5 Q
≤
0.5 … 20.0.
Individually set the Q (bandwidth) for each of the equalizer’s five bands. The higher
the value the narrower the bandwidth.
● Bnd1 … Bnd5 Level
≤
-24.0 … 23.6.
Individually set the level of the equalizer’s five bands. Negative values produce a
cut at the frequency of the corresponding band while positive values produce a boost.