3D Systems CubePro User Manual - page 13
Other manuals for CubePro:
User Manual, Repair Manual, Original Instructions Manual, Original Instructions Manual
Manual is about: Prosumer 3D Printer
of
86
9
3D Systems, Inc
.
UNPACKING AND SETTING UP YOUR CUBEPRO
CAUTION: Due to the size and weight of the printer, this procedure may require more than one person . Ensure
there are enough people to safely and comfortably move the printer to its final location.
NOTE: Ensure that you save all foam and packing material for the future repacking of your CubePro . Transporting
the printer without original packing materials may damage the printer .
1 . Carefully cut the straps (A) if applicable and then pull the tabs (B) on all four
release clips .
NOTE: There is one release clip on each side of the box .
2 . Pull the handles (A) and remove the release clips from the outer box .
3 . Lift the box away from the printer .
B
A
A