3D Systems CubePro User Manual - page 26
Other manuals for CubePro:
User Manual, Repair Manual, Original Instructions Manual, Original Instructions Manual
Manual is about: Prosumer 3D Printer
of
86
22
3D Systems, Inc
.
INSTALLING A MATERIAL CARTRIDGE
Before the printer will print a creation, the correct type of cartridge(s) must be installed in the printer . If the printer recognizes that no
cartridge has been installed, the display will prompt you to install the appropriate cartridge .
1 . Select
CHANGE CARTRIDGE
from the SETUP menu .
2 . Select the
cartridge
to be installed .
NOTE: The print jet will begin to heat .
3 . Open the
packaging
and remove the
thumbscrew
from the new cartridge .
Select the
checkmark
to continue .