3D Systems CubePro User Manual - page 79
Other manuals for CubePro:
User Manual, Repair Manual, Original Instructions Manual, Original Instructions Manual
Manual is about: Prosumer 3D Printer
of
86
75
3D Systems, Inc
.
NOTE: The printer will search for new firmware.
NOTE: Wait until the update has been completed .
WARNING: DO NOT POWER OFF OR DISCONNECT THE PRINTER
FROM UTILITY POWER DURING THE UPDATE PROCESS .
5 . Press and release the touchscreen display
ON/OFF button
and the display will
restart .
Updating Firmware Using WI-FI
To update the firmware using the wireless utility, the printer must be connected to a wireless network.
1 . Select
SETUP
.