3D Systems CubePro User Manual - page 25
21
3D Systems, Inc
.
Print Jet Calibration
CONTROL JETS
allows the user to test the operation of the extruders and print jets .
OFFSET JETS
is a utility that defines the parameters of the space between the print
jets .
CAUTION: Do not change any of the values in the OFFSET JETS
utility unless advised to do so by Cubify Support . Any changes
will alter the print quality of your creations .
Network
The
Network
menu allows the user to connect to a wireless network or to an ad hoc
device .
System
SELECT LANGUAGE
allows the user to localize the printer to their language .
LIGHT
allows the user to turn on or off the print jet LEDs . The other interior LEDs are
managed by the firmware when the CubePro is powered on.
Advanced
Selecting the
FIRMWARE
icon allows the user to update their firmware either with a
file downloaded to a USB mass storage device or by wireless connection.
By selecting
INFO
, the printer will display the printer status including the serial
number, the print jet temperatures, and the name of the wireless network to which the
printer is connected .
Material Upgrades
MATERIAL UPGRADES
us a utility that activates the use of optional materials
within the printer once the upgrade has been purchased . Once the upgrade has
been purchased on www .cubify .com, you will receive an activation code that must be
entered into the touchscreen display .